Every lot below has been physically inspected and catalogued by OmniTek Trading. Specifications are transcribed from each unit's own nameplate — where a plate was unreadable we say so on the listing rather than guess. Pricing is quoted per lot; use the request button on any item.
3.0 kVA
Outdoor-rated NEMA 3R
Drive isolation — VFD ready
2.00 kVA
Outdoor-rated NEMA 3R
3-pole (3 fuse holders, 3 line and 3 load lugs)
30 A maximum
NEMA 4 washdown-rated
509 Magnetic Motor Controller
24 general purpose amps
As-is / parts lot
AC adjustable-frequency micro drives (VFDs)
Hinged-door steel enclosure with DIN rail, motor contactor(s), overload block, control transformer and terminal blocks
As-is
3 enclosed safety switches wired via rigid conduit to 3 cast junction/device boxes on a plywood backer
As-is pallet lot
600 V.A.C. (read on one Square D safety switch label)
Verify before order
12 VDC per battery
New old stock
Arrow Hart 20A-250V, 2-pole 3-wire grounding, side wiring, commercial specification grade, NEMA 6-20R
R-22 refrigerant
R-22, 1 lb 13 oz (0.819 kg) charge
R-134A refrigerant
R-134A, 4 lbs charge
New in crate
Multi-position gas-fired warm air furnace, tubular heat exchanger
New in box
9150134000
10.4 gpm (39.4 lpm) at 77 °F
150 psig (1034 kPa)
Explosion-proof motor
1/2 HP
250 PSIG / 17 bar
4-way (ports B, A / EB, P, EA)
Specs pending re-inspection
Clamp-on portable liquid agitators (drum / IBC tote mixer style)
Specs pending re-inspection
Peristaltic (roller/tube) pump heads on stainless steel drive enclosures
Sold as a lot
AC motors, right-angle gearmotors, small pumps, timing-belt pulleys and sprockets, boxed bearings, contactors and relays, boxed spares
Complete system
Motor-driven roller (MDR) powered zone conveyor — straight sections plus right-angle transfer modules
Powered / live roller conveyor, straight sections
Chain-driven / powered roller conveyor
Specs pending re-inspection
Short powered roller conveyor bed, red chute/hopper section, red belt-drive stand with V-belt and two pulleys, one upright frame, flex conduit
As-is lot
Stainless/aluminum conveyor side frames and channel sections with pre-drilled mounting holes, bent transition and curve sections, adjustable guide-rail brackets with knobs, long UHMW guide rods and wear strips, angle brackets and hinged link sections
220V 60Hz — North American supply
Nameplate photo available on request
Pod-and-rail vacuum clamping, 6 movable pod carriages with digital position readouts
400V 50Hz — verify supply
Auto packing equipment
SWF McDOWELL MODEL - 201
316 stainless steel
New / unused
Sizes pending measurement
Flexible elastomeric shielded/unshielded pipe couplings (Fernco / Mission style)
As-is mixed lot
Assorted fittings including a cam & groove coupling, a cast-iron threaded fitting, a PVC threaded ring/nut, and rubber flex couplings with hose clamps
Motor and base only
Overhead laboratory stir / mixer motor with geared drive head and keyed chuck
UV / black light inspection lamp
New old stock
UV / black light fluorescent tube
Blow-molded HDPE bottles
Molded expanded polystyrene (EPS) foam
As-is / untested
Approximately 12-15 flat-panel LCD monitors, 2+ desktop tower PCs, power bricks and cabling, totes, and shrink-wrapped cartons of laser toner (counts estimated from one photo)
Open box
Compatible laser toner cartridge
We buy distressed and surplus industrial inventory outright — electrical gear, machinery, material handling, air and fluid equipment. One call, one inspection, one payout.