NEMA Size 0
Westinghouse A200M0CAC NEMA Size 0 Motor Starter with Thermal Overload — 3-Pole
A200 series NEMA magnetic motor starter
$85
Details →
OTT-2048 · Switchgear & Motor Control
Telemecanique GV2-M10 Manual Motor Starter — 4–6.3A, 3-Pole, 690V
$42
1
FOB North Carolina — freight quoted separately.
| Manufacturer | Telemecanique (Schneider Electric) |
|---|---|
| Model | GV2-M10 |
| Type | GV2-M magnetic-thermal manual motor starter / motor circuit protector |
| Current Range | Ie 4-6.3 A, category A, AC-3 |
| Rated Voltage | Ue 690 V, 50/60 Hz |
| Rated Impulse Voltage | Uimp 6 kV |
| Breaking Capacity | Icu / Ics per plate — 100 kA at 230/240 V and 400/415 V columns |
| Standards | IEC 947-2, 947-4-1; NF EN 60947-2 / 60947-4-1; VDE 0660, 0113 |
| Wire / Torque | Tightening torque 20 lb-in, 75 °C copper wire only |
| Trip | Tripping current 125% of dial setting; numbers on dial are motor full-load current |
Condition
Used, good. GV2-M10 body with the current dial legible at the 4-6.3 A band. The moulded breaking-capacity table on the side is readable. Rotary actuator operates through ON/OFF/TRIP. Housing clean.
How we catalog
Every specification above is transcribed from this unit's own nameplate or data label. Nothing is inferred from a model number or copied from a manufacturer catalog. Where a plate was unreadable or absent, the field is left off rather than estimated. Equipment is sold as-is; we have not powered up or performance-tested these units unless stated. Inspection is welcome and encouraged before purchase.
